"THIS ITEM HAS BEEN DISCONTINUED. "Engine Rebuild Kit.Fits Club Car gas 1986-91 carts with the 341cc(KF-82) engine (7312-B27)

Club Car Tune-up and Engine Specs 1984 to 1991 Club Car 344cc KF-82 Engine Standard Bore: 3.15 in. (80mm) Piston to Cylinder Clearance: .010 in. Bore Taper (top to bottom): .006 in. Bore Out of Round: .001 in. Ring end Gap (all): .006 in. Piston Pin to Piston Clearance: .002 in. Connecting Rod Big End Side Play: .020 in. Standard Crank Pin: 1.259 in. Crank Pin Wear: .002 in. KF-82 Valve Lash Specs Valve clearance for both intake and exhaust is .004 to .008 cold. Check with engine at TDC of compression stroke, make sure both valves are closed. To adjust first check your clearance Tappet caps come in sizes .106”, .114”, .124”, .134”, .144”. NOTE: To get the caps off you have to remove the cylinder. KF-82 Torque Specs Cylinder Bolts: 16-18 ft lbs Connecting Rod Bolts: 29-30 ft. lbs. Flywheel Nut: 60-65 ft lbs Spark Plug: 15-20 ft lbs Crankcase Bolts: 14-16 ft lbs Cylinder Head Shroud: 8-10 ft lbs Engine Mounting Nuts: 25-30 ft lbs