Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Quality finish, lasting UV protection

Snaps easily into place

Fits all standard 8" rims

Sold individually

Call for Availability

For E-Z-GO electric old G.E. Motor with crossover

OEM #13406-G1

Call for Availability

For E-Z-GO electric old G.E. Motor with crossover

OEM #13407-G1

For Club Car DS gas FE350 engine 1996-up

Includes piston, rings, wrist pin and clips.

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

For Club Car DS gas FE350 engine 1996-up.

Includes piston, rings, wrist pin and clips

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

1995 & Newer Club Car FE350 Engine Standard Bore: 3.2703 in. (83.067mm) Piston to Cylinder Clearance: .010 in. Bore Taper (top to bottom): .006 in. Bore Out of Round: .0022 in. max Ring end Gap (top & second): .047 in. max Piston Pin to Piston Clearance: .0023 in. max Connecting Rod Big End Side Play: .013 in. max Standard Crank Pin: 1.4742 in. (37.444mm) Crank Pin Wear: .002 in. FE350 Tune-up Specs Valve Clearance: No Valve Adjustment Neccessary Plug Gap: .028"-.031" Ignition Coil Air Gap Standard.: .3mm (.012") Air Gap Adjustment Range: .25mm-.4mm (.010"-.016") FE350 Tune-up Specs Cylinder Head Bolts: 18 ft lbs Connecting Rod Bolts: 17 ft. lbs. Flywheel Nut: 101 ft lbs Spark Plug: 17 ft lbs Crankcase Bolts: 23 ft lbs Fan Retaining Plate: 7.2 ft lbs Fan Housing: 7.2 ft lbs

For Club Car DS & Precedent 1992-up with FE 290 overhead valve engine.

Includes piston, rings, wrist pins and clips

Standard Bore on A FE290 is 3.070 US Measure OR 77.980mm

When boring cylinder, one over or .01 Over = .25mm & two over or.02 Over = .50mm Over

Here are the engine torque spec's:

cylinder head bolts 220 in.lb

connecting rod bolts 180 in.lb

side cover bolts 14-16 ft-lbs

flywheel nut 60-65 ft-lbs

spark plug 15-20 ft-lbs

crankcase cover to block bolts 250 in.lbs

cylinder head shroud 8-10 ft-lbs

engine mounting nuts 25-30 ft-lbs

Valve Clearance adjustment nut 90 in.lbs