Fits Club Car DS 1993-up Carts

Super Deluxe LED headlights and LED taillights

Deluxe Turn Signal Switch

Horn

Steering Wheel Column Cover

Brake Pad Switch With Pedal Mount

waterproof connectors

Kit uses energy efficient LED lights to reduce power consumption and preserve battery life

High quality, 12-volt unit works with gas carts or electric carts with voltage reducer

Voltage Reducer is Recommended for 36 Volt & 48 Volt Carts

Kit includes:

2 LED headlights

2 LED taillights

1 Upgraded Wire harness

Deluxe Turn Signal Switch

Horn

Steering Wheel Column Cover

Brake Pad Switch With Pedal Mount

Very easy to follow instructions and stainless steel mounting screws

For Club Car gas 1992-1996.

For Club Car gas 341cc engine 1984-1991

For standard bore

Includes piston, rings, wrist pin and clips

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car gas 341cc engine 1984-1991

For .25mm oversized

Includes piston, rings wrist pin and clips

Standard bore on a 341cc (KF-82 side value engine) is 3.150 US Measure. .01 Over = .25mm & .02 Over = .50mm

For Club Car DS gas FE350 engine 1996-up

Includes piston, rings, wrist pin and clips.

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

For Club Car DS gas FE350 engine 1996-up.

Includes piston, rings, wrist pin and clips

Standard Bore on A FE350 is 3.267 US Measure .01 Over = .25mm & .02 Over = .50mm Over

1995 & Newer Club Car FE350 Engine Standard Bore: 3.2703 in. (83.067mm) Piston to Cylinder Clearance: .010 in. Bore Taper (top to bottom): .006 in. Bore Out of Round: .0022 in. max Ring end Gap (top & second): .047 in. max Piston Pin to Piston Clearance: .0023 in. max Connecting Rod Big End Side Play: .013 in. max Standard Crank Pin: 1.4742 in. (37.444mm) Crank Pin Wear: .002 in. FE350 Tune-up Specs Valve Clearance: No Valve Adjustment Neccessary Plug Gap: .028"-.031" Ignition Coil Air Gap Standard.: .3mm (.012") Air Gap Adjustment Range: .25mm-.4mm (.010"-.016") FE350 Tune-up Specs Cylinder Head Bolts: 18 ft lbs Connecting Rod Bolts: 17 ft. lbs. Flywheel Nut: 101 ft lbs Spark Plug: 17 ft lbs Crankcase Bolts: 23 ft lbs Fan Retaining Plate: 7.2 ft lbs Fan Housing: 7.2 ft lbs

For Club Car DS & Precedent 1992-up with FE 290 overhead valve engine.

Includes piston, rings, wrist pins and clips

Standard Bore on A FE290 is 3.070 US Measure OR 77.980mm

When boring cylinder, one over or .01 Over = .25mm & two over or.02 Over = .50mm Over

Here are the engine torque spec's:

cylinder head bolts 220 in.lb

connecting rod bolts 180 in.lb

side cover bolts 14-16 ft-lbs

flywheel nut 60-65 ft-lbs

spark plug 15-20 ft-lbs

crankcase cover to block bolts 250 in.lbs

cylinder head shroud 8-10 ft-lbs

engine mounting nuts 25-30 ft-lbs

Valve Clearance adjustment nut 90 in.lbs

For Club Car DS & Precedent 1992-up with FE 290 overhead vale gas engine.

For .25mm oversized

Includes piston, rings, wrist pins and clips

Standard Bore on A FE290 is 3.070 US Measure .01 Over = .25mm & .02 Over = .50mm Over

For Club Car DS & Precedent 1992-up with FE 290 overhead valve gas engine

For 50.mm oversized

Includes piston, ring, wrist pin and clips

Standard Bore on A FE290 is 3.070 US Measure .01 Over = .25mm & .02 Over = .50mm Over

Fits 1990-1991 Club Cars DS gas

Highest quality, vacuum formed, vinyl replacement seat cover back on the market today!

Made in the USA

They are easy to install, & look Great

Extremely durable 68 gauge vinyl with multi layer barrier withstands heavy usage

Long term resistance to the suns UV rays

Highly mildew resistant

Resist cracking to -36 degrees F.

OEM style colors and patterns

This is not a complete seat assembly, but a staple on replacement seat cover.

These are seat back replacement covers for carts with "TWO" small seat back rest.

ORDER TWO PER CART for a full set

Click on the<< or >> under picture to see other colors

Highest quality, vacuum formed, vinyl replacement seat cover back on the market today!

Made in the USA

They are easy to install, & look Great

Extremely durable 68 gauge vinyl with multi layer barrier withstands heavy usage

Long term resistance to the suns UV rays

Highly mildew resistant

Resist cracking to -36 degrees F.

OEM style colors and patterns

This is not a complete seat assembly, but a staple on replacement seat cover.

These are seat back replacement covers for carts with "one" large seat back rest.

Click on the<< or >> under picture to see other colors